How climate change could trigger ‘mega-tsunamis’

How climate change could trigger ‘mega-tsunamis’

By Ryan P. Mulligan, Associate Professor, Civil Engineering, and Andy Take, Professor, Civil Engineering,

August 24, 2020

Share

Damage caused by a tsunami at Lituya Bay, Alaska.
In 1958 a tsunami triggered by a landslide left a large swathe of damage in Lituya Bay, Alaska. (Alaska Earthquake Center) 

Just over 60 years ago, a giant wave washed over the narrow inlet of , knocking down the forest, sinking two fishing boats and claiming two lives.

A nearby earthquake had triggered a rockslide into the bay, suddenly displacing massive volumes of water. The large landslide tsunami reached a height of more than 160 metres and caused a run-up (the vertical height that a wave reaches up a slope) of . For perspective, imagine run-up to about the height of the CN Tower in Toronto (553 metres) or One World Trade Center in New York City (541 metres).

Large landslides, like the one that hit Lituya Bay in 1958, are mixtures of rock, soil and water that can move very quickly. When a landslide hits a body of water, it can , especially in mountainous coastal areas, where steep slopes meet a fiord, lake or reservoir. Although mega-tsunamis are often , real and scientifically documented events motivate new research.

In late July, a , triggered a tsunami warning for south Alaska, the Aleutian Islands and the Alaskan Peninsula. And scientists recently warned that a in a popular fishing and tourism area not far from the town of Whittier.

International research efforts are urgently underway to better understand these major natural hazards. This is critically important, since climate change could contribute to increasing the number and size of these events.

Recent giant wave events

Triggered by either an , another massive landslide occurred in Alaska in 2015. This one was in , 500 kilometres east of Anchorage. This event was so powerful, it released an enormous amount of energy and registered as a magnitude 4.9 earthquake, approximately equal to the explosive force of .

The landslide impact into the water was so strong that it generated that were detected at monitoring stations in the United States and around the world. The impact generated a wave with a . Thankfully, the area is remote and no one was killed.

However, the 2017 landslide into , was deadly. It generated a 90 metre high tsunami at the impact site. This wave propagated 30 kilometres to the community of Nuugaatsiaq, wiping it out and killing four people. Other major landslide wave events have recently occurred in and .

Tsunamis are also generated by other mechanisms including earthquakes, volcanic collapse and submarine landslides. Earthquakes can trigger massive submarine landslides, which have been shown to be major contributors to the maximum tsunami run-up. This occurred when earthquakes struck and , resulting in run-up of 40 metres and seven metres in each case.

Predicting the wave size

Large landslide tsunamis are difficult or impossible to measure in the field. They typically occur in mountainous regions with very steep slopes, and therefore are usually far from big cities. Geologists have documented many of the cases by mapping the run-up elevations or deposits of trees and rocks washed off slopes after these events, like in Taan Fiord.

In October 2015, a massive landslide fell into Taan Fiord and created a tsunami that stripped the land more than 10 kilometres from the slide. (Ground Truth Trekking), 

But these natural hazards pose a major threat to society. What if a landslide into a reservoir creates a wave that overtops a dam? This happened in 1963 in , killing more than 2,000 people who lived downstream.

A better understanding of how landslides generate waves is crucial. Experimental studies are a way to gain insight into these waves. Laboratory tests have led to empirical of landslide tsunamis.

Recent research with detailed measurements using high-speed digital cameras is helping to determine the controls of the of waves. This has led to new research at Queen’s University that has improved the theoretical understanding of how and generate waves.

The wave size depends on the at impact. The can now be predicted and along with the wave amplitude (the distance from rest to crest), and be used as input to computer models for and . These models can help understand and predict the behaviour of waves at the laboratory scale and at the .

Past and future events

Since 1900, where large landslides have generated waves greater than 30 metres high. Two of these led to over 100 deaths in Norway in the 1930s. Of these eight major events, four have occurred since 2000.

However, other events with smaller waves have devastated more populated coasts. For example, the collapse of the generated a tsunami on the coast of Indonesia that caused over .

Will more of these events occur in the future? Climate change could influence the frequency and magnitude of these natural hazards.

A warming climate certainly changes northern and alpine environments in many ways. This can include , and , more frequent freeze-thaw cycles and increased rainfall or other . All of these can contribute to and increase the risk of a major landslide into water.

These natural hazards can’t be prevented, but damage to infrastructure and populations can be minimized. This can be achieved through scientific understanding of the physical processes, site-specific engineering risk analysis and coastal management of hazard-prone regions.The Conversation

___________________________________________________________

, Associate Professor of Civil Engineering,  and , Professor, Department of Civil Engineering, .

This article is republished from under a Creative Commons license. Read the .

Smith Engineering